Like any dynamic liquid, fuel will go bad if it is left to sit around in the open. In fact, according to experts, it can begin to spoil in as little as 30 days if it is not stored in an airtight and sealed container.
Unfortunately for us, the fuel tanks of our cars are not airtight, meaning that the fuel can still go bad after it has been put into our vehicles. For this reason, we need to find ways in order to keep our fuel fresh and ready to be burned.
In this article, we will be discussing everything that there is to know about fuel stabilizers, including what they can do, how to use them, and the benefits that they will bring. So let’s get right into it!
What is a Fuel Stabilizer?
As we have already mentioned, fuel stabilizers are dynamic liquids. In short, this fluid can be used to prevent oxidation in fuel, ultimately expanding its lifespan.
However, in more technical terms, fuel stabilizers provide the fuel in your gas tank with a protective layer in order to reduce oxidation. This liquid is usually made from petroleum products and can bond with the fuel in order to reduce any evaporation. Fuel stabilizers can also prevent petrol from forming resins that have the potential to damage the fuel injector of your vehicle.
When Should We Use Fuel Stabilizer?
You do not need to use a fuel stabilizer on a daily basis. When you drive your vehicle regularly, you may not even need to add this fluid to your fuel tank, as the petrol that is stored will most likely be burned or used up before it even begins to oxidize or evaporate.
However, when it comes to seasonal vehicles that use fuel (such as boats or lawnmowers), a fuel stabilizer is a great idea that could end up saving you plenty of money. More so, vehicles with older engines should have a fuel stabilizer added to them if they are not used for weeks at a time.
The different brands of fuel stabilizers come with different lifespans. With that being said, most brands will be able to preserve your fuel for an entire year or more, meaning that you will not have to worry about it going bad for a long period of time.
Benefits of Using Fuel Stabilizer
There are plenty of benefits to adding a fuel stabilizer to your gas tank. As we have already mentioned, this fluid can be used to increase the lifespan of the fuel that you have stored in your gas tank. In the long run, this can end up saving you plenty of cash, as spoiled fuel can potentially damage your fuel injectors, which would cost money to fix. More so, fuel stabilizers can assist in helping the fuel burn, improving the way in which your vehicle runs.
How to Use Fuel Stabilizer: A Step-by-Step Guide
When using a fuel stabilizer, you should follow the steps below in order to provide your vehicle with maximum protection.
Add a Suitable Amount of Stabilizer to the Gas Tank
Once you purchase a fuel stabilizer, you should read the instructions on the back of the container. This will inform you as to how much fluid you should add to your gas tank. It is important to note that your tank should almost be completely empty before you add the fuel stabilizer.
Fill the Gas Tank With Fuel
After you have added a suitable amount of fuel stabilizer to the gas tank, you will need to fill it with fuel. In doing this, you will be dispersing the fuel stabilizer with gasoline. More so, you will be reducing the amount of air and water that could potentially get into the tank.
Start Your Vehicle
You will now need to run the engine of your car. This will allow the fuel stabilizer to reach the fuel system of the vehicle. It is recommended that you let your car run for about 5 to 10 minutes before turning it off again.
Final Thoughts
When you do not use your vehicle for a few weeks, the gasoline will begin to oxidize and evaporate. A fuel stabilizer can then be used to increase the lifespan of the fuel that you have in your gas tank. But how to use fuel stabilizer efficiently? With the above information, you should now know exactly what to do!
When adding this fluid to your tank, you should read the instructions on the back of the container in order to know what a suitable amount would be. The tank should also be almost completely empty. After you have added the fluid, fill your tank with gasoline before allowing your car to run for 5 to 10 minutes.
There are plenty of benefits to using a fuel stabilizer. For example, it can save you money, as spoiled fuel has the potential to damage the engine and fuel injectors of your car.
Tre Racing Engines 